Label dispensers allow for easy, automatic removal of labels from its liner (or backing) while rewinding what remains of the material. It works on paper, acetate, polyester, vinyl, and a lot more substrates. An adhesive Label is consists of four layers: topcoat, facestock, adhesive, and liner that is cut into desired shapes More dispensers have three types namely manual, semi-automatic, and fully automated.
To use a manual label dispenser, the operator will need to rotate the label roll to separate the label from the liner. A semi-automatic uses a sensor to turn the labels which lets the operator remove and apply the label. Lastly, fully automated dispensers are a part of label applicators that systematically dispense and applied the labels.